Premium tensile testing machine wholesale? GESTER instruments is a national high-tech textile testing equipment manufacturers engaged in R&D and production of high precision physical properties textile testing instruments with 22 years experience, expertly specialized in providing integrated laboratory testing solutions for children’s products, textile, footwear and furniture. It has passed ISO 9001 certificate, “AAA Enterprise in Quality, Service and Credit” and was audited as SGS audited supplier. Read additional details on https://www.gesterinstruments.com/textile-testing-equipment.
Fabric color fastness to light machine Feature: The 2500W long arc xenon lamp is used to simulate the solar spectrum. High transmittance of filter combinations and use 95% of the transmittance filters and filter cartridges. With Low power consumption but achieve the same irradiation light requirements. To make the machine is more energy saving and environment friendly. Standard equipped with 420nm wave band, irradiance digital setting, real time monitoring, closed loop automatic regulation, providing the most stable irradiance test light source for different standards (340nm, 420nm, 300-400nm and 300-800nm band optional ). Test and radio transmission are powered by using light conversion technology, no additional power supply is required. With industrial temperature control (refrigeration) system for smoothly and fast adjusting temperature in test chamber.
Correct use of computerized universal testing machine: When the electronic stepless speed regulation adjusts the lifting speed, it cannot be operated too fast. Before using the 50KN power machine, pay attention to check the tightening of the clamp tightening screws. When lifting the lower clamp, the movement should be stable, avoid collision, and often check the tightness of the clamp screw. When replacing the test fixture, pay attention to cooperate to prevent bruises.
Pneumatic Bursting Strength Testing Machine For determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area. Provide with a digital readout of pressure with peak value hold facility, renewable rubber diaphragms, and manual clamping device with acrylic bell, forward reverse and neutral drive system. Provide accurate elongation information of fabrics, up to 0.1mm.
Gauge length and tension speed presettable; Able to set pre-tensile force; Many kinds of clamp are selectable according to requirements test standards, including pneumatic clamps. Textile fabric, such as bedsheets, clothes, etc., a lot of them will lose color after washing, some products fade seriously, even after washing many times, there will still be discolored. Test Preparation before Color Fastness to Washing. What test standards are there? Color fastness to washing is one of the common test items for textile dyeing fastness, which is mainly used to test the fastness of fabric clothing and home textile products after one or more times to simulate the dyeing after household washing and commercial washing. There are three common standard: AATCC 61, ISO 105 C06, GB/T 3921. Discover even more info at gesterinstruments.com.
The values stated in SI units are to be regarded as the standard, with the exception of mils when determining coating thickness.Test Procedure: The haze or original weight of test specimen is measured. The test specimen is then placed on the taber wear and abrasion tester. A 250, 500, or 1000-gram load is placed on top of the abrader wheel and allowed to spin for a specified number of revolutions. Different abrading wheels are specified. A haze measurement or final weight is taken. The load and wheel can be adjusted for softer and harder materials.
Premium martindale abrasion tester manufacturer
July 30, 2022
Industrial
Comments Off on Premium martindale abrasion tester manufacturer
Donald Rump
Premium tensile testing machine wholesale? GESTER instruments is a national high-tech textile testing equipment manufacturers engaged in R&D and production of high precision physical properties textile testing instruments with 22 years experience, expertly specialized in providing integrated laboratory testing solutions for children’s products, textile, footwear and furniture. It has passed ISO 9001 certificate, “AAA Enterprise in Quality, Service and Credit” and was audited as SGS audited supplier. Read additional details on https://www.gesterinstruments.com/textile-testing-equipment.
Fabric color fastness to light machine Feature: The 2500W long arc xenon lamp is used to simulate the solar spectrum. High transmittance of filter combinations and use 95% of the transmittance filters and filter cartridges. With Low power consumption but achieve the same irradiation light requirements. To make the machine is more energy saving and environment friendly. Standard equipped with 420nm wave band, irradiance digital setting, real time monitoring, closed loop automatic regulation, providing the most stable irradiance test light source for different standards (340nm, 420nm, 300-400nm and 300-800nm band optional ). Test and radio transmission are powered by using light conversion technology, no additional power supply is required. With industrial temperature control (refrigeration) system for smoothly and fast adjusting temperature in test chamber.
Correct use of computerized universal testing machine: When the electronic stepless speed regulation adjusts the lifting speed, it cannot be operated too fast. Before using the 50KN power machine, pay attention to check the tightening of the clamp tightening screws. When lifting the lower clamp, the movement should be stable, avoid collision, and often check the tightness of the clamp screw. When replacing the test fixture, pay attention to cooperate to prevent bruises.
Pneumatic Bursting Strength Testing Machine For determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area. Provide with a digital readout of pressure with peak value hold facility, renewable rubber diaphragms, and manual clamping device with acrylic bell, forward reverse and neutral drive system. Provide accurate elongation information of fabrics, up to 0.1mm.
Gauge length and tension speed presettable; Able to set pre-tensile force; Many kinds of clamp are selectable according to requirements test standards, including pneumatic clamps. Textile fabric, such as bedsheets, clothes, etc., a lot of them will lose color after washing, some products fade seriously, even after washing many times, there will still be discolored. Test Preparation before Color Fastness to Washing. What test standards are there? Color fastness to washing is one of the common test items for textile dyeing fastness, which is mainly used to test the fastness of fabric clothing and home textile products after one or more times to simulate the dyeing after household washing and commercial washing. There are three common standard: AATCC 61, ISO 105 C06, GB/T 3921. Discover even more info at gesterinstruments.com.
The values stated in SI units are to be regarded as the standard, with the exception of mils when determining coating thickness.Test Procedure: The haze or original weight of test specimen is measured. The test specimen is then placed on the taber wear and abrasion tester. A 250, 500, or 1000-gram load is placed on top of the abrader wheel and allowed to spin for a specified number of revolutions. Different abrading wheels are specified. A haze measurement or final weight is taken. The load and wheel can be adjusted for softer and harder materials.