Quality disc stack centrifuge wholesale manufacturer and supplier: Welcome all who care engaged in the separation and filtration to work with us,and we are also looking for the qualified world wide agents to provide better service and deep marketing. Shenzhou Machinery as the best custom decanter centrifuge and separator manufacturers, provides engineered 3D designs by 3D printer to meet your ideas. We have always followed the standardization rules for a rigorous production process, saving time and cost for both parties and bringing maximum benefits to you. Discover more info on Industrial Centrifuge Manufacturer.
What industry is the decanter centrifuge used for? Decanter centrifuge working principle：Centrifuges are useful in most industries where solids, liquids, and gases are mixed into a single substance, but separating the components is necessary. For example, decanters (also known as solid bowl centrifuges) continuously separate solids from liquids in slurries and therefore play an essential role in wastewater treatment, chemical, petroleum, and food processing industries. The basic principle of a decanter centrifuge relies on buoyant separation. The denser ingredients will fall to the bottom of the mixture while the less dense ones are suspended above. Due to a large centrifugal force, decanters rotate to separate the substances inside quickly. Before decanters were used, components took hours to settle, but a decanter centrifuge can take only a few seconds.
This drive system can not only maintain the hydraulic system to withstand high torque, but also achieve more precise differential speed and minimize or even eliminate peak starting current and vibration. Specifically, when starting the centrifuge, the screw is first started, which can eliminate any residual substances that may have been left during the previous operation and avoid the possibility of large startup vibrations caused by uneven distribution of residues during the rotary drum startup; At the same time, when shutting down the machine, first reduce the speed of the rotary drum, and then continue to discharge residual substances from the machine through the screw. This system, which drives the drum and screw separately and independently, can also start the screw separately when the machine is blocked, and discharge residual substances that remain inside the machine at low speeds, thereby simplifying the maintenance and repair process.
The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.
CBD Centrifuge is an all-in-one system that combines closed low temperature alcohol extraction with mechanical centrifugation. With PLC controller and LCD touch screen, with forward/reverse/dehydration functions and the ability to set the time and number of cycles, all of which can be programmed according to actual usage for more efficient separation. The system’s one-cycle run time is approximately 10-15 minutes, ensuring high quality raw extracts in a short period of time. CBD can alleviate pain associated with multiple sclerosis, treat inflammation caused by a variety of conditions and treat epilepsy. THC is an active ingredient in nabiximols, a specific extract of Cannabissativa that should be separate from CBD. Some governments regulate the concentration of THC and permit only hemp that is bred with an especially low THC content. Discover additional info at lnszjx.com.
The structure and working principle of a Decanter centrifuge – The Decanter centrifuge relies on the density difference between solid and liquid phases, and under the action of centrifugal force, accelerates the settling speed of solid particles to achieve solid-liquid separation. There is a conical section designed in front of the drum, which rotates at a set speed according to the different properties of the material. The material rotates at the design speed on the inner wall of the drum, forming a concentric liquid layer along the drum shell, called the liquid ring layer. The solids contained in the material are deposited onto the wall of the drum under the action of centrifugal force, and then the dry material is pushed out of the drum through spiral operation. The operating speed of the drum directly determines the separation factor, while the speed difference of the screw directly affects the solid moisture content transported outside the drum. It has a direct impact on processing capacity, residence time, and solid discharge.